oh shnikeys
cb7 fanatic
Joined: Oct 2003
Posts: 927
Likes: 0
From: Gulfport MS
Originally Posted by 18secFerio
TOS :down: :happysad:
I can't talk about pot anymore :sad:
I can't talk about pot anymore :sad:
hnoes: I feel ya....The title of this thread has to got to be the funniest evAr :lmao:
ntopic: I think the lips look really nice, an overall :thumbup: for the car
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Originally Posted by VtecRacer
Fair point. Either paint them all, or leave them black, both ways are still alright 
As promised here's pics of mine just back from the shop.
mounting kinda sucked, but it wasn't too bad....
Originally Posted by Surfacing171
hnoes: I feel ya....The title of this thread has to got to be the funniest evAr :lmao:
ntopic: I think the lips look really nice, an overall :thumbup: for the car
Originally Posted by 99civic_love
you know, if your car and my car had sex, they would make beautiful babies
:chuckles:
:chuckles:
actually, there's this chick with a civic like yours (99-00 teal blue sedan, but hers is an ex), and she's got like a drop, exhaust, some minor shit. I keep seeing her around, and I want to meet her so I could be like "hey, nice car" :chuckles: :exnbp:
Originally Posted by Surfacing171
Are you trying to tell him something? 
hnoes:
Senior Member
Joined: Aug 2002
Posts: 237
Likes: 0
From: Ontario
Originally Posted by 18secFerio
:werd:
mounting kinda sucked, but it wasn't too bad....
mounting kinda sucked, but it wasn't too bad....
Remove bumper, place lip on the bottom of the bumper, and just mark the holes, dripp'em, mount it?
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Originally Posted by VtecRacer
How'd u go about mounting the lip on the bumper? I didn't get the templates that are used in the Installation instructions from Honda
Remove bumper, place lip on the bottom of the bumper, and just mark the holes, dripp'em, mount it?
Remove bumper, place lip on the bottom of the bumper, and just mark the holes, dripp'em, mount it?
I can scan them :dunno:
Thread Starter
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
ok, so basiclly, these are the two templates. The larger one is for the 4 inner screws, and the smaller one is for the final two outer screws. There's two more screws that get mounted by using a double-sided circular peice of tape, but I didn't bother with that, and just lined it up and drilled away. I just used a normal drill, with 3 different size bits (I can't remember the sizes, but the first one was a pin-hole size, up to a 10mm, I think?).
I didn't even take off my bumper. I did it on my back :rick:
line up the larger template with the place where there's two major screws on the bottom of the bumper, middle back. There's a squarish outcrop that fits close to the templates little outcrop (again, the larger template, and where I'm talking about is where it says "for right hand size"). It lines up with the bumper very well.
same goes with the smaller template. It lines up almost near where the rear wheel well goes.
the penny is there for proper sizing....
I didn't even take off my bumper. I did it on my back :rick:
line up the larger template with the place where there's two major screws on the bottom of the bumper, middle back. There's a squarish outcrop that fits close to the templates little outcrop (again, the larger template, and where I'm talking about is where it says "for right hand size"). It lines up with the bumper very well.
same goes with the smaller template. It lines up almost near where the rear wheel well goes.
the penny is there for proper sizing....
ch1x0r
Joined: Sep 2002
Posts: 18,629
Likes: 0
From: PA
Originally Posted by 18secFerio
:werd:
looking good :goodjob:
mounting kinda sucked, but it wasn't too bad....
:chuckles: thanks
you know, if you and me had sex, we'd make beautiful babies, too :chuckles:
actually, there's this chick with a civic like yours (99-00 teal blue sedan, but hers is an ex), and she's got like a drop, exhaust, some minor shit. I keep seeing her around, and I want to meet her so I could be like "hey, nice car" :chuckles: :exnbp:
I wishhnoes:
looking good :goodjob:
mounting kinda sucked, but it wasn't too bad....
:chuckles: thanks
you know, if you and me had sex, we'd make beautiful babies, too :chuckles:
actually, there's this chick with a civic like yours (99-00 teal blue sedan, but hers is an ex), and she's got like a drop, exhaust, some minor shit. I keep seeing her around, and I want to meet her so I could be like "hey, nice car" :chuckles: :exnbp:
I wish
hnoes:
Senior Member
Joined: Aug 2002
Posts: 237
Likes: 0
From: Ontario
Originally Posted by 18secFerio
ok, so basiclly, these are the two templates. The larger one is for the 4 inner screws, and the smaller one is for the final two outer screws. There's two more screws that get mounted by using a double-sided circular peice of tape, but I didn't bother with that, and just lined it up and drilled away. I just used a normal drill, with 3 different size bits (I can't remember the sizes, but the first one was a pin-hole size, up to a 10mm, I think?).
I didn't even take off my bumper. I did it on my back :rick:
line up the larger template with the place where there's two major screws on the bottom of the bumper, middle back. There's a squarish outcrop that fits close to the templates little outcrop (again, the larger template, and where I'm talking about is where it says "for right hand size"). It lines up with the bumper very well.
same goes with the smaller template. It lines up almost near where the rear wheel well goes.
the penny is there for proper sizing....
I didn't even take off my bumper. I did it on my back :rick:
line up the larger template with the place where there's two major screws on the bottom of the bumper, middle back. There's a squarish outcrop that fits close to the templates little outcrop (again, the larger template, and where I'm talking about is where it says "for right hand size"). It lines up with the bumper very well.
same goes with the smaller template. It lines up almost near where the rear wheel well goes.
the penny is there for proper sizing....
will post pics once it's installedI think I know pretty much where to place each template and where to drill according to the installation instructions.
Thanks again :cheers: