So i've been reading...and I've got some questions
WAAAGH!!
Joined: Aug 2000
Posts: 28,751
Likes: 0
From: San Jose, CA
as far as inexpensive swaps go, you can always put the K20A2 head on top of the K20A3 block.
other than that, the K24 from a CR-V or 4 cylinder accord would work as well. they both have 160hp, but more torque which isnt a bad thing at all.
stock motor can handle 12psi safely. although i have seen stock K20A3's that have taken more than that.
honestly, i would spend a little extra money and look into a revhard kit or something similar as there are more gains to be had over the greddy kit, IMO.
other than that, the K24 from a CR-V or 4 cylinder accord would work as well. they both have 160hp, but more torque which isnt a bad thing at all.
stock motor can handle 12psi safely. although i have seen stock K20A3's that have taken more than that.
honestly, i would spend a little extra money and look into a revhard kit or something similar as there are more gains to be had over the greddy kit, IMO.
Senior Member
Joined: Mar 2008
Posts: 235
Likes: 0
From: Costa Mesa, CA
You do not need to build up the motor if you stay within the stock boost levels. Im boosting about 8.5lbs and it runs like a dream. its reliable, quick, and if i really wanted to built another block, make some real power.