Notices

Getting a 12v amp cord through the fire wall of my ep3...How do I do it?

Thread Tools
 
Old Dec 12, 2007 | 11:23 AM
  #1  
02 SD Si's Avatar
02 SD Si
Thread Starter
Junior Member
 
Joined: Nov 2007
Posts: 4
Likes: 0
From: San Diego
Default Getting a 12v amp cord through the fire wall of my ep3...How do I do it?

Where on the firewall of an 03 Civic Si can I put the 12v amp power wire? Do I need to drill my firewall? Can anyone post pics. Thanks.
Reply
Old Dec 12, 2007 | 01:03 PM
  #2  
Tedmond's Avatar
Tedmond
Senior Member
 
Joined: Nov 2007
Posts: 407
Likes: 0
Default

03 civic firewall hole is hard to get to. if u go to passenger side, remove the carpet on floor towards engine bay. To the middle consol you will see a black grommet piece towards floor of the car, from that make a hole to the RIGHT hand side of the black grommet. stick a fish wire or coat hanger through and tie on ur wire. from the engine pull slowly, and lube up the hole u made with some WD40.
Reply




All times are GMT -8. The time now is 12:23 PM.