Hey boost, how hard was it to remove your airbag? For me, its either put a screen there or do my whole dash in plasma screens.
(as if I had the money)

 

i removed the passenger airbag in 10 minutes. philly screws and 10 milli nuts.

 

What size hose do you need,outer diameter in "imperial" measurements (ie)3/8,1/2,etc.).I might be able to get you some from my work.We make OEM engine oil cooler lines,tranny lines and A/C lines.Let me know I might be able to hook you up.Hope this helps.:thumbup:

P.S. The lines are tensile tested to hold like up to 1100psi but OEM spec is only like 8-900psi.If it's not what you're looking for than ignore this post.

 

thanks anywanys importsyn, i already bought the lines and murrays gave me a better deal



Mr.Badguy just as machinehead said, it takes about 10-15mins, very simple

make sure you put the red connector on the air bag connector to prevent it from going off.
i pryed off the fastners holding on the top part of air bag and put it back on the dash, so the airbag is now gone but it still looks stock

 

A better deal than free???Oh well just thought I'd try and help out,maybe another time.