My ATTS light is on, we took it to the dealer to run it and they couldnt find anything. Any suggestions on what it could be. Im thinking possibly a wheel speed sensor.

 

if the honda dealer couldn't find the code for the ATTS light try a diffrent dealer or sheck it yourself by shorting the SCS with a paperclip

 

Or just got and automotive parts store (Kreagen, Autozone) and borrow one of their scanners.

 

those places cannot scan anything except generic OBD2 codes only people that have a Vertronics Mastertech or HDS can scan ATTS,ABS,SRS codes and it's not free since those scanners are over 6k each.

 

Didint know that. I've scanned ODB1 SRS codes in the past, assumed this would be the same.

 

if you are refering to OBD1 SRS codes you cannot scan then with a scanner you short out the SCS connector and count the flashes because theres no data link connection honda,acura never put a com port for this . most autopart stores use the cheep scanner $99-$300 our snap-on MT2500 will scan OBD1 CEL through the 3 pin DLC plug and still not SRS,ABS,ATTS codes unless the ATTS commanded a CEL code and only then the CEL is read. only OBD2 96+ can be scanned with hand held scanner since they use the standard OBD2 connector but only powertrain management with generic scanners .

 

So what are some things i should check out?

 

the trouble code for starters by shorting out the blue SCS connector.

 

yeah im going to try that this weekend then check the code/codes with helms. Hopefully its nothing to major BUT it probably is oh well.lol

Stephanie

 

Thats strange... If they didn't find a code for it then why is it on? Do you have CEL (check engine light) code? If you do, then that explains why the atts lights on...