if you are refering to OBD1 SRS codes you cannot scan then with a scanner you short out the SCS connector and count the flashes because theres no data link connection honda,acura never put a com port for this . most autopart stores use the cheep scanner $99-$300 our snap-on MT2500 will scan OBD1 CEL through the 3 pin DLC plug and still not SRS,ABS,ATTS codes unless the ATTS commanded a CEL code and only then the CEL is read. only OBD2 96+ can be scanned with hand held scanner since they use the standard OBD2 connector but only powertrain management with generic scanners .