Notices

need firing order

Thread Tools
 
Old Nov 3, 2004 | 11:08 AM
  #1  
brianteel's Avatar
brianteel
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 27
Likes: 0
Default need firing order

i need the firing order and which wire goes to where on the dizzy
Reply
Old Nov 3, 2004 | 11:50 AM
  #2  
heyfrench's Avatar
heyfrench
1989 Honda Prelude 2.0si
 
Joined: Mar 2004
Posts: 74
Likes: 0
From: Richmond, VA
Default

what year
Reply
Old Nov 3, 2004 | 12:24 PM
  #3  
brianteel's Avatar
brianteel
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 27
Likes: 0
Default

95
Reply
Old Nov 4, 2004 | 08:20 PM
  #4  
donger's Avatar
donger
Junior Member
 
Joined: Feb 2004
Posts: 21
Likes: 0
From: Gilbert, AZ
Default

firing order is 1-3-4-2. i believe it is that for almost all 4 cyl honda engines also
Reply
Old Nov 4, 2004 | 08:29 PM
  #5  
brianteel's Avatar
brianteel
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 27
Likes: 0
Default

thanks i got that now i just need to figure out the codes i am getting so i can fix the idling problem
Reply
Old Nov 4, 2004 | 08:31 PM
  #6  
donger's Avatar
donger
Junior Member
 
Joined: Feb 2004
Posts: 21
Likes: 0
From: Gilbert, AZ
Default

what kind of idling problem do you have?
Reply
Old Nov 4, 2004 | 08:35 PM
  #7  
brianteel's Avatar
brianteel
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 27
Likes: 0
Default

it sometimes is stead but most of the time bounces like there is a vaccum leek. If i move the dizzy alittle it will steady then start bouncing again. I know i have to time it but i dont think that is causing it. what i really need is a diagram where all the lines go
Reply
Old Nov 4, 2004 | 08:40 PM
  #8  
donger's Avatar
donger
Junior Member
 
Joined: Feb 2004
Posts: 21
Likes: 0
From: Gilbert, AZ
Default

i have that same bouncing problem but mine only happens when i have the a/c on. i've asked around but no one could tell me what was wrong
Reply
Old Nov 4, 2004 | 08:42 PM
  #9  
brianteel's Avatar
brianteel
Thread Starter
Registered User
 
Joined: Jul 2003
Posts: 27
Likes: 0
Default

do you know how to pull the codes off the OBD1 ECU.....that looks to be my only problem at this point
Reply
Old Nov 4, 2004 | 08:45 PM
  #10  
donger's Avatar
donger
Junior Member
 
Joined: Feb 2004
Posts: 21
Likes: 0
From: Gilbert, AZ
Default

no i dont, sorry
Reply




All times are GMT -8. The time now is 10:54 AM.