okay, I got my ZEX dry kit, but I have some questions on how to prepare my motor for it....first, the motor has about 160,000 miles on it. (h23) burns no oil, so it's in pretty good condition for it's age. I want to run a 65 shot, and have adjustable cam gears. how should I adjust them to accomodate the boost? anything else I should do before I start spraying?

 

when you put on the zex kit all you have the do is make sure you retard timing 2 degrees for a 65 shot and also get colder spark plugs and gap them smaller Or just use the zex triple electrode plugs. i use them on my turbo car
make sure you installed the nozzle at least 12-14 inches away from the throttle body so the nitrous can flow evenly through the engine.
leave the cam sprockets alone. if you touch them, make sure its on a dyno

good luck