Hi All...my first post here. I just replaced the brake booster on my Legend and was curious if anyone ever had any trouble with the little rubber gaskets between it and the master cylinder when putting it all back together. I initially didnt get any pressure when I tried tro bleed the system, took the MC back off and discovered one of the gaskets had been nearly sucked into the booster and wasnt giving me a tight seal. I straightened it all out, put the MC back on and havent bled the system again yet since I wanna make sure my problem might be elsewhere. Hard to do without jackstands too...LOL
I was trying to save myself a few $ by doing it myself but I dont think Im cut out to be a mechanic