Skunk 2 Intake Manifold
Thread Starter
Never fast enough member
Joined: Nov 2002
Posts: 560
Likes: 0
From: Arlington, TEXAS
Skunk 2 Intake Manifold
Ok so I orderd a skunk 2 intake manifold and I was wondering if there is anything special that I will need when doing installation. I have heard that you need to get a differnet throttle but am not sure, so I have come to you guys.
So OG it hurts.
Joined: Mar 1999
Posts: 6,592
Likes: 0
From: VA
you can use your stock tb if you want. i would recommend you got yours port matched to the skunk2 manifold.
it's 64 mm inlet, and integra's are 60 mm i believe, and the itr is 62 mm.
if you don't wanna do that.
get atleast the hondata intake manifold gasket and help keep the intake manifold cooler.
easy install since you'll be right there.
it's 64 mm inlet, and integra's are 60 mm i believe, and the itr is 62 mm.
if you don't wanna do that.
get atleast the hondata intake manifold gasket and help keep the intake manifold cooler.
easy install since you'll be right there.
Thread Starter
Never fast enough member
Joined: Nov 2002
Posts: 560
Likes: 0
From: Arlington, TEXAS
Originally posted by Bumnah
you can use your stock tb if you want. i would recommend you got yours port matched to the skunk2 manifold.
it's 64 mm inlet, and integra's are 60 mm i believe, and the itr is 62 mm.
if you don't wanna do that.
get atleast the hondata intake manifold gasket and help keep the intake manifold cooler.
easy install since you'll be right there.
you can use your stock tb if you want. i would recommend you got yours port matched to the skunk2 manifold.
it's 64 mm inlet, and integra's are 60 mm i believe, and the itr is 62 mm.
if you don't wanna do that.
get atleast the hondata intake manifold gasket and help keep the intake manifold cooler.
easy install since you'll be right there.
Where can i get the hondata gasket and how much is it
been there done that
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
