U know i looked at the pictures again, and i think you have the same problem i did.

Take apart the abs sensor line brackets. Remove the line from the bracket by bending the tabs holding the line in. That will give some room to put the tie bar brackets under the LCA bolt.

My Spoon Tie bar didnt want to fit with the ABS sensor line brackets in place, so i just removed them altogether and used some zipties. I hardly step on the brakes hard enough to engage the ABS anyway (like once every 6 months, seriously).

 

nice sandals.

 

Thanks I lowered them about an inch and changed the soule LOL:naughty: .

 

are the soul's JDM

 

yeah and i walk with the right one first so it's JDM.LOL



So I tried to move the abs wire and that dident help the breacket for the sway bar is still in the way, I think I am going to bend or chave the little black piece on the tie bar so it will fit. Will see what happends.

 

LOL :lmfao:

 

you might try grinding the bracket for the tie bar so you dont take a chance of weakening the sway bar,

 

That is whati planned on doing but i jsut don't have time. Thanks for the Idea Tho:thumbup:

 

dc sports, skunk2 or comptech?? need opinions cant decide

 

DC sports and Comptech should never be in the same sentence. If money is no object, then the Comptech rear sway + tie is pretty slick.

Shingo