itr rear sway, where to buy?
Joined: Jun 2001
Posts: 58,579
Likes: 0
From: Lll
Originally posted by dom93hatch
Yo Will how much did the dealer parts run you?
Yo Will how much did the dealer parts run you?
__________________
.
.
Large Member
Joined: Oct 2000
Posts: 4,735
Likes: 0
From: Bay Area, CA
Originally posted by airon
www.acuraautomotiveparts.org
you have to run the bsq or the beaks kit to make it fit though
www.acuraautomotiveparts.org
you have to run the bsq or the beaks kit to make it fit though
Love it.
AARONNOJIMA.COM
Joined: Aug 2000
Posts: 8,559
Likes: 0
From: Elk Grove, Ca AOL/AI
Originally posted by HYBRID
would you guys say that it is worth it to spend an extra $40 and buy the ST rear sway bar, there is a "deal" going on on groupbuycenter?
would you guys say that it is worth it to spend an extra $40 and buy the ST rear sway bar, there is a "deal" going on on groupbuycenter?
also what size is the ST one?
I got the ITR one cuz its relatively cheap, even with the kit you have to buy, and its OEM (which i have been leaning towards more and more with my mods)
up to you though, im sure the ST one is blining red and silver
__________________
"Dreaming is how the strong survive....."
"Am I dying to live, or living to die?"
"Dreaming is how the strong survive....."
"Am I dying to live, or living to die?"
Thread Starter
Senior Member
Joined: May 2002
Posts: 4,792
Likes: 0
From: Bay Area
no the st isnt the one with the tie bar, and from the info i gathered its 3/4" which translates to 19mm. but there is no point in paying more for a bar that is not as thick, so im going to go with the type-r.
now my question is that the front sway bar on my 96 ls is 22.1 mm, correct? will i have problems the back end coming around to much? would it be worth it to upgrade the front to a 24mm type-r as well? i have ground controls with koni reds.
now my question is that the front sway bar on my 96 ls is 22.1 mm, correct? will i have problems the back end coming around to much? would it be worth it to upgrade the front to a 24mm type-r as well? i have ground controls with koni reds.
Master Bator
Joined: May 2002
Posts: 185
Likes: 0
From: in front of you
Here's how:
1.) Go to http://www.acuraautomotiveparts.net/...searchpart.jsp and enter the following part numbers to order:
52300-ST7-Z01 rear swaybar
52315-ST7-Z01 swaybar bushing (2 needed)
52308-SS0-000 bushing bracket (2 needed)
52316-ST7-Z00 endlink bushing (2 needed)
52312-ST7-Z00 endlink bushing collar (4 needed) – this part can be reused from the stock swaybar
90175-ST7-Z00 bolt (8x35) (2 needed)
94050-08080 flange nut (8mm) (2 needed)
Cost ~$85 shipped.
2.) Go to http://www.geocities.com/bretq/mounting_kit.html to order Type-R rear swaybar mounting/reinforcement kit (aka BSQ mounting kit). Cost $20 shipped.
Total cost for everything ~$105 shipped.
1.) Go to http://www.acuraautomotiveparts.net/...searchpart.jsp and enter the following part numbers to order:
52300-ST7-Z01 rear swaybar
52315-ST7-Z01 swaybar bushing (2 needed)
52308-SS0-000 bushing bracket (2 needed)
52316-ST7-Z00 endlink bushing (2 needed)
52312-ST7-Z00 endlink bushing collar (4 needed) – this part can be reused from the stock swaybar
90175-ST7-Z00 bolt (8x35) (2 needed)
94050-08080 flange nut (8mm) (2 needed)
Cost ~$85 shipped.
2.) Go to http://www.geocities.com/bretq/mounting_kit.html to order Type-R rear swaybar mounting/reinforcement kit (aka BSQ mounting kit). Cost $20 shipped.
Total cost for everything ~$105 shipped.
