which bolt is the tranny fluid filler bolt!! is it the one behind the axle aproxximatly 17mm?? i know wich ones the drain bolt but i cant find the filler bolt!! i have a 1990 integra with a b16a!!:naughty: :naughty: :naughty:

 

You might want to ask in the Civic Forum. But this might help: http://www.hondaautomotiveparts.com/...ISSION+HOUSING

Manual or Auto? Try your own search. Hope that helps. Good luck, eh.

 

its not a regular socket bolt.

i think that bolt takes a 1/2 drive....or 3/4", i forget.

 

1/2" I think... True for the Integra. I'd imagine most Honda tranny's are similar. Something to look for rayoracinng.

 

It's a 1/2 on my 99 Accord EX, never look at what it was on the 97 teg.

 

:naughty: :chuckles: :yay: :fawk:

i just finished my task!! it is a 17mm bolt that is right behind the right axle!! it was right in the owners manual:doh: and i put in motor oil for now!! i just gotta get my tags and drive down to a honda dealer and gets some honda MTF


BTW the trannny had not even one quart of liquid in it!! and it got filled with two and a lil bit of the third one!!:thumbup:


thank you all that tried to help!! much appreciation goes to you guys!!

 

Good Job!!

Just to clarify...

Integra's 3/8" drive (and that's the drain hole, not the fill hole): http://www.c-speedracing.com/howto/t...transfluid.php

 

umm no!! the drain hole us just underneeth the fill hole!! the drain hole is a 3/8 inch socket style bolt!! where as the fill hole is a 17mm bolt!!

 

That's what I said.

 

:thumbup: :thumbup: :thumbup: