Converting integra ls from auto to manual?
11-13-2007, 08:17 AM
#2
Still Water
Join Date: Aug 2004
Location: San Diego
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
http://www.team-integra.net/forum/di...g+Common+Topic
"1. The trans.
2. Linkage rod assembly (any 94-01 teg)
3. Manual trans. console
4. Shifter and knob
5. Manual ECU
6. Pedal assembly (94-01 civic or teg)
7. Clutch slave and master cylinders
8. Clutch fluid container
9. Clutch hard lines and hoses
10. Flywheel and bolts
11. Clutch set with alignment tool and throw out bearing.
12. Manual intermediate shaft (94-01 teg, 95-97 delsol, 99-01 civic)
13. Rear trans. mount bracket for manual trans. (94-01 teg only!)
14. Front trans. mount bracket for manual trans.
15. After re welding the bracket on chassis, a top tran. mount for manual trans. (94-01 teg)
16. Starter for manual trans.
17. Lots of spare bolts and nuts
18. Air tools
19. GM syncromesh #12345349, 3 quarts."
"1. The trans.
2. Linkage rod assembly (any 94-01 teg)
3. Manual trans. console
4. Shifter and knob
5. Manual ECU
6. Pedal assembly (94-01 civic or teg)
7. Clutch slave and master cylinders
8. Clutch fluid container
9. Clutch hard lines and hoses
10. Flywheel and bolts
11. Clutch set with alignment tool and throw out bearing.
12. Manual intermediate shaft (94-01 teg, 95-97 delsol, 99-01 civic)
13. Rear trans. mount bracket for manual trans. (94-01 teg only!)
14. Front trans. mount bracket for manual trans.
15. After re welding the bracket on chassis, a top tran. mount for manual trans. (94-01 teg)
16. Starter for manual trans.
17. Lots of spare bolts and nuts
18. Air tools
19. GM syncromesh #12345349, 3 quarts."