anyone here have a pic of there eagle manifold with vac lines veiwable for me......im installing it soon and need to know where the vac lines go and come from. anyone, thanks!

 

Golden Eagle?

 

ye sorry

 

got this from Golden Eagle's website:

http://www.goldeneaglemfg.com/images..._SCHEMATIC.pdf

that's not the only way to do it, but it's certainly a do-able option

 

Here is how I have mine hooked up:



I suck at paint, but everyone keeps asking for it, so this will save some explaining.

 

BOV comes from BOV
3.5lb MAP.....if im running stock then i wont need this right
Boost gauge comes from gauge-where did u get that adapter for the little line to go into the bigger hose?
EBC controller is the Electronic boost controller? can i use the manual one u sold me right here?
WG is the wastegate and that come from the one on the side, not the top right?

THANKS BTW, both pictures are big helps

 

You won't need the EBC controller or the 3.5 bar MAP sensor. The manual boost controller I sold you splices halfway into the wastegate line.

I got the adapter for the boost gauge fitting at Pepboys.

 

on the tial 38mm WG there are 2 ports a back and a top....i use the back right?
on the inlet side of the turbo theres a brass elbow fitting....does something go there?

 

The inlet side of the turbo is where you want to connect the wastegate because it is will see boost as it is being made instead of waiting for it to go through all the piping and to the vacuum manifold. You don't have to tap it here, so if you want to use the manifold, plug it with a vacuum cap.

 

so let me get this straight.......
connect the back of the WG the fitting on the inlet of the turbo? does the boost controller u sold me go in between there and tee off to the VAC Manifold....