When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anybody have any info on Honda-Acura tranny compatibility? I just got a 90 Teg LS with a blown auto tranny. Was wondering if a Honda would fit cause i have one. Thanks
I think the only "Honda" transmission that would work would be out of the 99-00 Civic Si. I could be, and probably am wrong, but I'm almost certain that will bolt up to a B18B engine.
sadly a 90 deg doesent use the b18 engines... depends on the honda tranny, tegs and scivies have been really close in devlopment for very long...
I'm pretty sure the 90 integra comes with a b18a1, unless of course its a gsr, in which case the engine would be a b17 vtec. In either case any b- series transmission would work, including that of the 99-00 si. The problem would be changing from a cable tranny to hydro, in which case the slave and master cylinders would be needed from the civic, along with the VSS i (think). Also if i'm not mistaken the pedal assembly is different. Some one else correct me if i'm wrong