alright, right after i got my window roll up installed with my alarm, the passenger side mirror stopped working.

it moves right and left, but, when i try to adjust the mirror up and down, it doesnt move for shlt.

does anyone know why?

i tried checking the wires, but they all looked like they were untouched and all seemed to be connected right.

the driver side works fine, but the passenger side doesnt work right.

 

First off, welcome to HAN.

Here's a thought. If the alarm uses t-tap connectors to splice into the factory wiring harness, it's possible that they could have spliced into one of the lines controlling the mirror motor....Other than disassembling the mirror assembly and checking each wire for continuity, I'm not quite sure what to suggest. The systems aren't really dependent on one another; which is why I suspect that this problem is simply coincidental.


Just out of curiosity, how old is your Integra? Which model is it?

 

yeah, they installers did a bootleg job. when i checked the wires, they were spliced and taped up, instead of using the buttconnectors.

i have a 96 integra LS.