Need a good suspension setup.
Hellsing Agency
Joined: Mar 2002
Posts: 1,561
Likes: 0
Originally posted by Taiwanze7
The other thing you would consider putting on the GC sleeves is some teflon tape.... it works well enough in protecting/keeping clean the threads
The other thing you would consider putting on the GC sleeves is some teflon tape.... it works well enough in protecting/keeping clean the threads
Shingo
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 16,353
Likes: 0
From: Ossining, New York
Originally posted by DeadLock23
Hey BonzoAPD I know you, lol.
anyway I just ordered my H&R sport springs and KYB AGX adjustables. A good setup for you would be the H&R OEM, they are .75 drop all around, not too low but lower, and you can use the tokico premium shocks (since I dont think you will be doing any type of autoX, otherwise an adjustable shock would do)
After that, you can get comptech lower sway bars and rear strut bar, and you should feel a great difference in handeling.
hope that helps.
Hey BonzoAPD I know you, lol.
anyway I just ordered my H&R sport springs and KYB AGX adjustables. A good setup for you would be the H&R OEM, they are .75 drop all around, not too low but lower, and you can use the tokico premium shocks (since I dont think you will be doing any type of autoX, otherwise an adjustable shock would do)
After that, you can get comptech lower sway bars and rear strut bar, and you should feel a great difference in handeling.
hope that helps.
Thread
Thread Starter
Forum
Replies
Last Post
BonzoAPD
Integra & 97-01 Integra Type-R
7
Oct 15, 2004 11:07 PM