When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have been running castrol syntec blend since we put the motor in and have yet to burn a drop.. even after 2 days at VIR full and about 30 hours of highway driving..
Your car shouldn't be burning oil. Maybe there is a leak somewhere. Do you use the same washer each time your put the oil plug back. You must use a different one, and it costs about 15 cents.
Your car shouldn't be burning oil. Maybe there is a leak somewhere. Do you use the same washer each time your put the oil plug back. You must use a different one, and it costs about 15 cents.
The original poster is talking specifically about burning oil.
You are correct, we should replace the washer, but I am not sure how that could contribute to the original poster's problem.
I changed to valvoline 2 weeks ago-there is less black on my bumper and also have not lost a drop yet. If it was still mobil one I would have already lost 1/4 quart.
Well Friday after work I did an oil change and went back to Moble 1 oil but am trying the 15-50, so far the only thing I noticed was the car takes alittle bit longer to warm up other then that nothing.
I'll be sure to give updates on my consumpsion with this weight.
I really think I'm leaking oil through my Orings. I'm changing to spoon pistons, and I'll post any different results in oil burning.. I'm burning about 1quart every 1,800miles...
Heavy soot on the rear bumper.. Lets see..I'm using the Mobil 1 15-50....