Notices

Getting stomped in 3rd

Thread Tools
 
Old Oct 15, 2003 | 01:37 PM
  #1  
Cheap Labour's Avatar
Cheap Labour
Thread Starter
Member
 
Joined: Oct 2003
Posts: 48
Likes: 0
Default Getting stomped in 3rd

I've noticed a lot of you guys saying that you're getting stomped in 3rd gear. Have you tried revving 2nd way up and dropping right down into 4th?
Reply
Old Oct 15, 2003 | 01:47 PM
  #2  
SUPER LAUBO's Avatar
SUPER LAUBO
KiMBO's Hubby
 
Joined: Mar 2002
Posts: 3,488
Likes: 0
From: San Hose Jose
Default

:ugh: that's a negatory there mister.... your gear ratio would be too spaced out for that... you'll lag more than anything.
Reply
Old Oct 15, 2003 | 01:53 PM
  #3  
Cheap Labour's Avatar
Cheap Labour
Thread Starter
Member
 
Joined: Oct 2003
Posts: 48
Likes: 0
Default

I thought it up last night on the freeway on the way to work. On my way back I tried it once or twice. Bright side is it drops you into the power band. A bit of fiddling and you MIGHT be able to get something good out of it.
Reply
Old Oct 15, 2003 | 03:02 PM
  #4  
Daniel's Avatar
Daniel
Senior Member
 
Joined: Apr 2001
Posts: 8,232
Likes: 0
From: Concord, NC
Default

I don't understand how it would be beneficial. With a GSR, taking it up to redline then shifting to third puts you right at your secondaries opening up. If you were to shift into fourth, you'd be even lower, with VTEC not even engaged yet.
Reply
Old Oct 15, 2003 | 03:28 PM
  #5  
Cheap Labour's Avatar
Cheap Labour
Thread Starter
Member
 
Joined: Oct 2003
Posts: 48
Likes: 0
Default

For us guys without VTEC
Reply
Old Oct 15, 2003 | 06:01 PM
  #6  
Patman015's Avatar
Patman015
Gold Member
 
Joined: Aug 2003
Posts: 640
Likes: 0
From: MD
Default

shifting right into fourth will take you partly outta the power band i think? whats the power band for a GS-R? I know itz 170hp @ 7600 rpm...but ranges does the power band fall in? when im racin, i dont think i get it up to 7600 rpm...too scared that my engine will fall out haha...abuse isnt good...well, not all the time at least
Reply
Old Oct 15, 2003 | 06:10 PM
  #7  
WhiteLitening's Avatar
WhiteLitening
I'm like dis'........
 
Joined: Sep 2002
Posts: 214
Likes: 0
From: St. Louis, MO
Default

I was wondering, who on here is gettings stomped in third gear?? That's where I take all my races. Second I pull, and third gear vtec is the closer for a winning race.
Reply
Old Oct 15, 2003 | 06:39 PM
  #8  
axhammer's Avatar
axhammer
Canadian Icelander
 
Joined: Jun 2003
Posts: 103
Likes: 0
From: Toronto, Ontario
Default

Easy way to fix that. Instead of getting mods that only help top end hp. Try improving ur Torque, it will make up for your taller gears. Thats why mustangs have good 1/4 even with not that much hp.
Reply
Old Oct 15, 2003 | 06:41 PM
  #9  
Xymox007's Avatar
Xymox007
Björkian
 
Joined: Jul 2003
Posts: 722
Likes: 0
From: Pennsylvania
Default

One things for sure, learning the quickest (and safest) way to drop from 5th at 80mph into 3rd is the most beneficial way of making up for our poor excuse for torque.
Reply
Old Oct 15, 2003 | 07:56 PM
  #10  
Daniel's Avatar
Daniel
Senior Member
 
Joined: Apr 2001
Posts: 8,232
Likes: 0
From: Concord, NC
Default

Originally posted by Xymox007
One things for sure, learning the quickest (and safest) way to drop from 5th at 80mph into 3rd is the most beneficial way of making up for our poor excuse for torque.
I actually blew a transmission shifting at that high of a speed. The shifting itself wasn't the initial cause for the blowup, the transmission fluid was actually low. Shifting at 80mph put me somewhere close to redline, and the sudden increase in heat (friction) blew a couple of bearings.

I usually reserve my 5-3 shifts for speeds of around 55-65mph. Anything above that and I either wouldn't attempt anything (why are you street racing anyways) or shift to 4th.
Reply



All times are GMT -8. The time now is 12:47 PM.