Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

compatable tranny

Thread Tools
 
Old Jun 8, 2003 | 10:08 AM
  #11  
crucial v.2.2's Avatar
crucial v.2.2
Banned
 
Joined: May 2003
Posts: 298
Likes: 0
From: MIAMI
Default

Originally posted by yellow civic ex
im running about 180whp and about the same torque @~5500rpm. decent for a civ. prolly wanna stick with the ex tranny anyways.
prove it.
Reply
Old Jun 8, 2003 | 04:56 PM
  #12  
Neptune's Avatar
Neptune
Junior Member
 
Joined: Jun 2003
Posts: 4
Likes: 0
Default

Any d series tranny will work. I believe that any b series gears will fit into the tranny. So you could buy a b series tranny and switch the gears to yours.
Reply
Old Jun 11, 2003 | 11:24 AM
  #13  
qtiger's Avatar
qtiger
Moderator
 
Joined: Jun 2001
Posts: 11,776
Likes: 0
Default

Originally posted by silverstreakin
how much??
I have two, actually. The second one's been exposed to air for a year, so the input shaft and starter shaft are a little rusted. The starter I'd pick up at a junkyard, but the input shaft could be cleaned up with a little bit of patience.

Originally posted by yellow civic ex
yea, i would be very interested...how much are you asking?? how many miles?? anything need to be replaced on it?? where you live?
Asking for reasonable offers. Miles are unknown, but the two were pulled out of 99 and 00 Civic EXs a year ago, so I'm estimating 50,000 miles or less.

I was told both are in good condition. The good one is attached to a spun bearing motor, the slightly rusty one was used by someone who got a little too nitrous happy and threw a rod through the block.

I'm in southeast Michigan. Zip is 48189 if you want to Mapquest it or something.
Reply




All times are GMT -8. The time now is 03:53 PM.