I am looking for an answer to what car do i need a throttle cable out of for a b16a2 into a 94 civic coupe? thanks

 

either cable should work. I would prefer getting the longer one. Actually, I think they are the same length. But anyways, you will have enough cable slack from either of those cables.

 

You can get the b16a throttle cable, but if you just wanna pick one up from a junkyard. Try the crx dx cable. I believe that one is pretty long. We used that on my friends jdm b18c swap, cause the civic cable wasn't long enough.

 

Get the one out of the 94-95 Del Sol VTEC, that should work perfectly with your swap.

 

thanks alot guys:thumbup:

 

i used my stock civic cable on my b18c1 install in the ex coupe. after doing teh skunk2 manifold, i noticed that it would work with either manifold design, so you shouldn't have a problem w/ the stock cable.

 

the bracket on the stock motor for the slack adjuster in the throttle cable and the bracket on the b16a2 are both on the manifold itself and are 4 and 6 inches apart respecitvely, so im gonna have to find the bracket that goes on the throttle body like the gsr or find a cable with the correct length to fit the b16a2 and the car.