Hey people, I'm at the point where I'm about to have my setup tuned I could use some guidence in making sure I have the critical parts for tunning. I was going to stay with the drag exhaust manifold for now, and change the wastegate to a Tial. Am I going in the right direction?

Here's the current state of my setup:

**new mod


**- Hondata S100 w/ boost (installed)
- GM 3 bar map sensor (on hand)
- Delphi 780cc injectors (on hand)
- Tial wastegate 35mm (soon to be ordered)
- Greddy Profec B boost controller (soon to be ordered)
- AEM fuel reg. (soon to be ordered)
- 1.6L stroked to 2.0L using Crower stroker kit
- JG engine dynamics Pro engine II block job (first rebuild)
- Drag III turbo T3/T4
- HKS blow-off valve
- Delta Wastegate
- Turbonetics intercooler kit
- Crower rods
- JE 9:1 pistons
** - Comptech engine rebuild : (second rebuild)
** resleeved, bored & honed cylinders
** resurfaced, balanced and blue printed
** polished crank shaft
** custom JE forged pistons (9.0:1)
** Moly rings and replaced all bearings
** Hot tanked
** - Supertech valves and valve seals (iron valve guides)
** - Type R rocker assembly
** - GSR cams
** - Toda springs and retainers
** - Nippon power head gasket
** - Port & polish head
** - Centerforce dual friction clutch
** - Integra GSR radiator
- Iron sleeves
- Integra type R dual valvesprings
- Multi angle valve job
- AEM cam gears
- DC sports cat back exhaust (no cat)
- DC sports short shifter
- STR fuel rail
- Holley 255lph fuel pump
- B&M fuel regulator (soon to be removed)
- Vortech fuel riser (soon to be removed)
- MSD SCI ignition
- MSD coil
- MSD distributor
- 95 GSR ECU
- DC sports front strut bar
- Nuespeed rear lower tie bar
- Speedware mid car brace
- Arospeed adj coilovers
- Mugan thermostat
- Mugan radiator cap
- Fal thin radiator fan
- Billet missing link map sensor check valve (soon to be removed)
- Blitz turbo timer
- Autometer gauges
- Chrome valve cover
- Enki 17" rims (removed)
- Removed AC


Here's the sleeper...














Let me know what you think

Thanks!

 

i'm not from this board but I am drooling over your car. Damn she looks good. Sometimes makes me wish I still had my SI but I love my accord more. Keep up the good work.

 

looks sick dood! i'm mega jealous

 

haha, you'll get more logical answers in the engine tech forum. I'll COPY this thread there, just be sure to look for it in there also.

 

dam thats clean