Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Cel 14

Thread Tools
 
Old 04-22-2003, 11:22 PM
  #1  
sunshine
Torqueless Wonder
Thread Starter
 
sunshine's Avatar
 
Join Date: May 2002
Location: UCSD
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Default Cel 14

I got a cel code 14, IAV sensor defective/unlpugged.... what should I check?
Old 04-23-2003, 01:41 AM
  #2  
drift
Flaccid Member
 
drift's Avatar
 
Join Date: Jul 2002
Location: Seattle
Posts: 571
Likes: 0
Received 0 Likes on 0 Posts
Default

check the Idle Air Valve on the intake plenum. make sure the sensor plug is connected and undamaged, wiring is in good condition. if all is good, your IAV is faulty and needs to be replaced. your manual would have told you this.
Old 04-23-2003, 02:13 PM
  #3  
inspyral
のんびり~(´ε`)
 
inspyral's Avatar
 
Join Date: Sep 2000
Location: San Jo, Cali
Posts: 2,314
Likes: 0
Received 1 Like on 1 Post
Default

Also make sure you don't have any vac leaks or air in your cooling system. Either of those will make it impossible for the IACV to idle the car properly, and the ECM will then think the IACV is faulty.




All times are GMT -8. The time now is 05:20 PM.