JUN3 Cams
Thread Starter
Junior Member
Joined: Jun 2007
Posts: 12
Likes: 0
Gouged JUN3 Cams...opinions or tips please...thanks
Ok...well i have a bit of a dilemma...I have these JUN 3 Cams which are now nearly impossible to find and i do not want to waste them...the VTEC Lobe on cyl. 3, exhaust side, is a bit gouged and I want to try to sand with fine paper and oil and maybe save these great cams...any opinions or tips? Thanks Guys. 
Last edited by rpm8500; Jun 14, 2010 at 07:20 PM.
Moderator
Joined: May 2002
Posts: 14,429
Likes: 0
From: Beverly Hills, CA
yea do not attempt to do it yourself. leave it to the pros and their precision tools/machinery.
where did the gouge come from?
you might be dealing with warped/non-repairable cams as well.
where did the gouge come from?
you might be dealing with warped/non-repairable cams as well.
__________________
DB Squad
Integra Forum Moderator
2016 BMW 340i M-Sport / 2013 Chevrolet Volt / 1999 Subaru Impreza RS EJ205
DB Squad
Integra Forum Moderator
2016 BMW 340i M-Sport / 2013 Chevrolet Volt / 1999 Subaru Impreza RS EJ205