Honda-Acura.net - JUN3 Cams

Honda-Acura.net (https://www.honda-acura.net/forums/index.php)

- Engine Swaps, Tech & Tuning (https://www.honda-acura.net/forums/engine-swaps-tech-and-tuning-33/)

- - JUN3 Cams (https://www.honda-acura.net/forums/engine-swaps-tech-and-tuning/605695-jun3-cams.html)

rpm8500

06-14-2010 05:39 PM

Gouged JUN3 Cams...opinions or tips please...thanks

Ok...well i have a bit of a dilemma...I have these JUN 3 Cams which are now nearly impossible to find and i do not want to waste them...the VTEC Lobe on cyl. 3, exhaust side, is a bit gouged and I want to try to sand with fine paper and oil and maybe save these great cams...any opinions or tips? Thanks Guys. :confused:

GSRRacer95

06-17-2010 10:32 AM

Contact a machine shop.

Spec R

06-20-2010 10:30 PM

yea do not attempt to do it yourself. leave it to the pros and their precision tools/machinery.

where did the gouge come from?

you might be dealing with warped/non-repairable cams as well.

All times are GMT -8. The time now is 01:15 AM.