I need help chosing my bearings for my d16.

I had to have my crank turned and polished and I have to have my block line bored so I don't have any idea of what the final dimesions are going to end up being.

I know what my block main journal diameters are now but the crank didn't get measured before I droped it off.

When I get it all back and finished how do I know what bearing to get, and from who?

I think I've got a general idea. Do I?
Measure crank main journals say 2.167 (it's somewhere in there)
Mearsure block journals now 2.326 in spun journal so lets say 2.328 will be final.

is it?
2.328 block
-- 2.167 crank
---------------
.1610
-- .0014 (oil clearance)
-----------------
.1596 divide by 2 and I get

.0798

Is that how thick of a bearing I need?

TIA

 

have the machine shop work the crank for you, and also get the dimensions of the block's crank journals. Once you have those outer and inner bearing dimensions, order bearings. I wouldn't get the bearings first, at least wait till you know how much the shop is going to take off of the crank.