Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Cooling system question!!

Thread Tools
 
Old Feb 25, 2003 | 05:42 PM
  #1  
civicon19s's Avatar
civicon19s
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 201
Likes: 0
From: Carrollton, GA
Default Cooling system question!!

Hey guys, im runnin a b17a in my 97 hatch w/ stock radiator. I have noticed that the system seems to be building too much pressure---> After toping the coolant completely off, i drive the car around for an hour. When i cut the car off i notice the resevoir is COMPLETELY full of coolant. Also, i can let the car sit for 2 days after driving it, then open the radiator cap and STILL release pressure. My question is what could be causing there to be so much pressure and why is it not bleeding it off?? The coolant overflowing from the resevoir is making things messy! PLEASE HELP!
Reply
Old Feb 25, 2003 | 05:52 PM
  #2  
inspyral's Avatar
inspyral
のんびり~(´ε`)
 
Joined: Sep 2000
Posts: 2,314
Likes: 1
From: San Jo, Cali
Default

Coolant normally expands when it gets hot. If you're getting more coolant than usual in the reservoir, you may have a blown headgasket.
Reply
Old Feb 25, 2003 | 06:31 PM
  #3  
civicon19s's Avatar
civicon19s
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 201
Likes: 0
From: Carrollton, GA
Default

F!U!C!K!!!!!!!!!!!!!!
Reply




All times are GMT -8. The time now is 06:53 AM.