Hey,

Are there noticiable flow differences between b18c injectors and the ones for a b16?

 

They're the same thing.

 

:stupid:

 

They're both 240cc

 

all Honda injectors are 240cc right?

 

Nope. H22s have higher flow injectors. And I'm sure there's some low flow stuff out there.

 

VEHICLE Injector Types Flow Rate
1988-91 Civic si/crx si Peak and hold 240cc
1992-95 Civic si/ex Saturated 240cc
1996-00 Civic Saturated 240cc
1990-91 Integra Peak and hold 240cc
1992-00 Integra ls/gsr/type R Saturated 240cc
1992-96 Prelude non-vtec Peak and hold 240cc
1992-96 Prelude VTEC Peak and hold 345cc
1997-up Prelude VTEC Saturated 280cc
1991-up Sentra se-r/200sx se-r Saturated 265cc
1991-up MR2 Turbo Peak and hold 440cc
1988-91 Supra Turbo Peak and hold 550cc
1993-up Supra non -Turbo Saturated 315cc
1993-up Supra Twin Turbo Peak and hold 550cc
2000-up Celica GT-S Saturated 310cc
1990-up Miata 1.6 liter Saturated 215cc
1993-up Miata 1.8 liter Saturated 240cc
1993-up RX-7 Twin Turbo Saturated 550cc/850cc
1990-96 300zx Twin Turbo Saturated 370cc
1991-up 3000GT VR-4 Peak and hold 350cc
1989-up Eclipse Turbo Peak and hold 450cc

 

The list is correct except for the 97+ are 290cc

 

and the 92-96 Lude injectors are 310cc.

that list is all jacked up... it's probably from hybrid honda, of which all their info is incorrect unless it says "B series"

 

Drift you are wrong the 92-96 prelude H22a1 injectors are 345cc peak and hold I have seen people that have had theres cleaned and the flow rate is 345cc