Help on engine building
01-31-2003, 04:10 PM
#1
Member
Thread Starter
Join Date: Jul 2002
Location: Atlanta, Ga
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Help on engine building
I have a question for you guys this is directed to anyone who knows a good bit about cars by the way I have a 1997 Honda Accord Auto I'm doing a H22a Manual conversion I'm planning on building the engine and turbo charging it with a T60-1 @ 20psi it my question is What should I get done to my engine for this application?
Im thinking of just porting and polishing it
Boring it out But I don't know what to?
and sleeves and of course low compresion internals
anyone have any suggestions or experiance with this
anything would be greatly appreciated
Thanks
Vic
Im thinking of just porting and polishing it
Boring it out But I don't know what to?
and sleeves and of course low compresion internals
anyone have any suggestions or experiance with this
anything would be greatly appreciated
Thanks
Vic
01-31-2003, 04:38 PM
#2
Moderator
Join Date: Jun 2001
Posts: 11,776
Likes: 0
Received 0 Likes
on
0 Posts
I would suggest selling your car and purchasing a manual Accord. You can save a lot of money in the swap along with all related hassles.
And if you can find an Accord with a blown or dying motor, you'll really save some cash.
And if you can find an Accord with a blown or dying motor, you'll really save some cash.
