Which cams are which, Type R/GSR?
06-19-2002, 12:12 PM
#1
Member
Thread Starter
Join Date: Mar 2002
Location: San Diego
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Which cams are which, Type R/GSR?
How can you tell the difference between ITR camshafts and GSR camshafts. I just bought some used ones from a guy and the claimed ITR's cam lobes look the exact same as the GSR's. Are there any sure ways of confirming that these are the real deal?
06-19-2002, 02:50 PM
#2
Captain
Join Date: Jun 2002
Location: Winnipeg, MB
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
you can measure the lobe height. They are as follows:
Integra GSR Intake
Primary - 33.41116 mm
Mid - 36.37788 mm
Secondary - 34.54654 mm
Integra Type R Intake
Primary - 33.08858 mm
Mid- 35.91052 mm
Secondary - 34.73196 mm
Integra GSR Exhaust
Primary - 33.11144 mm
Mid - 35.72002 mm
Secondary- 34.38144 mm
Integra (or Civic) Type R Exhaust
Primary - 32.78378 mm
Mid - 36.33216 mm
Secondary - 34.69132 mm
That should solve the problem. There is no part number on the cams...
Their should be, that would make things much easier.
Integra GSR Intake
Primary - 33.41116 mm
Mid - 36.37788 mm
Secondary - 34.54654 mm
Integra Type R Intake
Primary - 33.08858 mm
Mid- 35.91052 mm
Secondary - 34.73196 mm
Integra GSR Exhaust
Primary - 33.11144 mm
Mid - 35.72002 mm
Secondary- 34.38144 mm
Integra (or Civic) Type R Exhaust
Primary - 32.78378 mm
Mid - 36.33216 mm
Secondary - 34.69132 mm
That should solve the problem. There is no part number on the cams...
Their should be, that would make things much easier.
Thread
Thread Starter
Forum
Replies
Last Post
k20pro1
Parts Classifieds
20
10-04-2005 05:00 AM
