Piston and Crank interchange...Plz help!
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Location: Houston, TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Piston and Crank interchange...Plz help!
Hello fellow speed junkies! I am puttting together a 91 CRX SI. I bought a SOHC out of a 97 Civic DX and an EX head. The crank and one rod in this motor is bad. Does anyone know if the crank and rods will fit from my stock CRX motor? PLEASE HELP! I need to get this car back on the road. I am entering it in the 24 Hours of LeMons! Thanks in advance...
#2
why dont u jest put the vtec head on the d16a crx si block ,the d16 si will put more power an be more realible than the d15b dx ,pluss the d16a has bigger pistons an stronger rods , but if u can find them use the vtec pistons an rods there the best for the menime also look in to menime swops