Valve job :confused:

gsrstyle · 2002-12-08 23:40:00

So what goes on when you do a 3-angle valve job? :confused:

Reply Subscribe

Thread Tools

Dec 8, 2002 | 02:40 PM

gsrstyle

Thread Starter

Nitrous Junkie

Joined: May 2002

Posts: 105

Likes: 0

From: San Diego

Valve job :confused:

So what goes on when you do a 3-angle valve job?

Dec 8, 2002 | 02:51 PM

inspyral

のんびり～(´ε｀)

Joined: Sep 2000

Posts: 2,314

Likes: 1

From: San Jo, Cali

The valves are backcut at 3 different angles, which is supposed to make for better sealing against the seats.

Dec 8, 2002 | 09:28 PM

Brian

Junior Member

Joined: Dec 2002

Posts: 10

Likes: 0

the valve seats in the head are cut with 3 angles, a 45 where the valve sits and then two other usually secret angles leading into the port. a good valve job consists of 5 base angles and then blend the seats into the ports.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump