GSR swap
Thread Starter
Member
Joined: Mar 2007
Posts: 54
Likes: 0
GSR swap
could i swap a b18c1 into my 95 ls integra? i know the tranny is a bolt up, but what about the wiring harness? i would be running a chipped p28 as i would want a new fuel map, from some of the mods that are rather aggresive, new cams, ITR pistons 
let me know, i heard wiring harness from the b18b is not compatable with a GSR motor
let me know, i heard wiring harness from the b18b is not compatable with a GSR motor
Senior Member
Joined: Oct 2004
Posts: 4,270
Likes: 0
From: Texas
You would need to run wires for the knock sensor, vtec solenoid, and anything else that doesn't have a clip. You might also have to extend a few things.
I've never done the swap personally, but it might be easier to just buy a GSR harness.
I've never done the swap personally, but it might be easier to just buy a GSR harness.
