B18C in 93 del Sol
10-18-2006, 03:01 PM
#1
H22 EG6
Thread Starter
Join Date: Jul 2004
Location: Birmingham, AL
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
B18C in 93 del Sol
I'm trying figure out if I put a B18C (JDM) in my car that comes w/ ECU and harness, is there anything I have to modify? And what is the difference between 96-97 spec and 98-up spec?
Thanks,
Lambert
Thanks,
Lambert
10-18-2006, 05:35 PM
#3
Join Date: Jul 2003
Location: michigan
Posts: 28,282
Likes: 0
Received 0 Likes
on
0 Posts
You cant use the JDM harness anyway.
10-22-2006, 09:01 AM
#4
Registered User
Join Date: Jul 2005
Location: FL
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Ok look.......A JDM B18C will swap into a del sol with little problems.
If you buy a swap...buy it from www.hmotorsonline.com If you call them up....They'll incude almost everything you need to do the complete swap....Everything but shift linkages I think. So you'll need del sol VTEC shift linkages. You can get em from www.inlinefour.com. Hasport makes motormounts specificly for this swap so there ya go, done with that. If you buy from Hmotors they'll supply the right ECU but you'll need a conversion harness for it....I cant remember where to get one off of the top of my head but do a search and you'll find em. Axles are easy. Just use 94-97 Del Sol VTEC axles or Hmototrs will supply tou with the right ones.
Hoped this helped.
If you buy a swap...buy it from www.hmotorsonline.com If you call them up....They'll incude almost everything you need to do the complete swap....Everything but shift linkages I think. So you'll need del sol VTEC shift linkages. You can get em from www.inlinefour.com. Hasport makes motormounts specificly for this swap so there ya go, done with that. If you buy from Hmotors they'll supply the right ECU but you'll need a conversion harness for it....I cant remember where to get one off of the top of my head but do a search and you'll find em. Axles are easy. Just use 94-97 Del Sol VTEC axles or Hmototrs will supply tou with the right ones.
Hoped this helped.
10-22-2006, 11:00 AM
#5
Join Date: Jul 2003
Location: michigan
Posts: 28,282
Likes: 0
Received 0 Likes
on
0 Posts
Ok look.......A JDM B18C will swap into a del sol with little problems.
If you buy a swap...buy it from www.hmotorsonline.com If you call them up....They'll incude almost everything you need to do the complete swap....Everything but shift linkages I think. So you'll need del sol VTEC shift linkages. You can get em from www.inlinefour.com. Hasport makes motormounts specificly for this swap so there ya go, done with that. If you buy from Hmotors they'll supply the right ECU but you'll need a conversion harness for it....I cant remember where to get one off of the top of my head but do a search and you'll find em. Axles are easy. Just use 94-97 Del Sol VTEC axles or Hmototrs will supply tou with the right ones.
Hoped this helped.
If you buy a swap...buy it from www.hmotorsonline.com If you call them up....They'll incude almost everything you need to do the complete swap....Everything but shift linkages I think. So you'll need del sol VTEC shift linkages. You can get em from www.inlinefour.com. Hasport makes motormounts specificly for this swap so there ya go, done with that. If you buy from Hmotors they'll supply the right ECU but you'll need a conversion harness for it....I cant remember where to get one off of the top of my head but do a search and you'll find em. Axles are easy. Just use 94-97 Del Sol VTEC axles or Hmototrs will supply tou with the right ones.
Hoped this helped.
