b18 type r conversion
im new to teh forum and come from teh crx forum.
i need some help with my b18 conversion and im aimingh to have it done in a month as my b16 is gonna go bang soon!!!
i wanna go 2 ways but eather way will lead to a turbo vtec.
1)b18 type r engine all the way with having to rework eletricks to suit
2)b18 bottom end with a b16 head on type r cams
gear box
im in 2 minds weather to run my b16 box, swap for a sir lsd box or run teh type r box.
im already running obd1 engine management on a chip. but have skunk 2 inlets ready to go on.
any help advice be a great help thanx
eather email me on nova16valve@hotmail.co.uk
pm me or tcall me 07967780458
thanx simon
i need some help with my b18 conversion and im aimingh to have it done in a month as my b16 is gonna go bang soon!!!
i wanna go 2 ways but eather way will lead to a turbo vtec.
1)b18 type r engine all the way with having to rework eletricks to suit
2)b18 bottom end with a b16 head on type r cams
gear box
im in 2 minds weather to run my b16 box, swap for a sir lsd box or run teh type r box.
im already running obd1 engine management on a chip. but have skunk 2 inlets ready to go on.
any help advice be a great help thanx
eather email me on nova16valve@hotmail.co.uk
pm me or tcall me 07967780458
thanx simon
wrong. both usdm and jdm itr motors respond very well to boost. you just have to have a very good tune or go boom.
dont get a b18c5 if you're going to boost. go with option #2 you listed.
dont get a b18c5 if you're going to boost. go with option #2 you listed.
thats what i think im gonna do, any ideas what boost levels i can go with, i knwo b16s will take 7psi at best but not found out bout the b18 yet
where are you located?
i have a t28 off a s13/s14 200 sx cant remember the spec ok it. i dont mind spendingthe money but as long as its quality i get back


