Small Problem, just wanted to know the best way to set the timing on my engine, Timing belt broke so I got a new head belt and everything else to do it. Thanks....

 

Line up the TDC mark on the crank with the mark on the lower timing belt cover, set the cams both to TDC, slip the belt on, and tension.

Here is a writeup: http://www.team-integra.net/sections...ArticleID=1044

If your belt snapped, chances are you bent valves since the B18 is an interference engine. You really need to remove the head and check for any bent valves before you replace the timing belt.

 

http://www.c-speedracing.com/howto/timingbelt/tbelt.php

theres another write-up for you

 

Thanks alot guy's for the info. The valves are bent but I already knew that, I bought new valves and head kit.