B20 Swap
been there done that
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Originally Posted by Ziken
What is a good tranny for the swap? I want something that has acceleration but at the same time has some top end speed
Senior Member
Joined: Feb 2005
Posts: 123
Likes: 0
From: Fla USA
Dude go with a b20 block, b16 head cause it flows better than a gsr or if you have the dough a type r head, get a integra type r tranny already has lsd and the gearing is sick my buddy has a type r in his eg runnin 12.9 with intake, vtec controller, fuel cell, omni suspension and no back seat and we've takin it to 150 and the tranny still has more left as with the motor...But back to your setup....B20 block, type r head, type r tranny and a chipped p28 that will be fast enough for you im sure.....
4500rpm hesitation
Joined: Jun 2003
Posts: 4,374
Likes: 0
From: Hesperia
Originally Posted by turboB16
Dude go with a b20 block, b16 head cause it flows better than a gsr or if you have the dough a type r head, get a integra type r tranny already has lsd and the gearing is sick my buddy has a type r in his eg runnin 12.9 with intake, vtec controller, fuel cell, omni suspension and no back seat and we've takin it to 150 and the tranny still has more left as with the motor...But back to your setup....B20 block, type r head, type r tranny and a chipped p28 that will be fast enough for you im sure.....
your friend is a hell of a driver.
Senior Member
Joined: Feb 2005
Posts: 123
Likes: 0
From: Fla USA
runnin 2.0 and 1.9 sixty foots i agree he is a hell of a driver but he definitely beats on it a bit much just a matter of time but for now its sick!
Originally Posted by alphaxxn
your friend is a hell of a driver.
Eg b20b turbo
Joined: Aug 2005
Posts: 102
Likes: 0
From: San jose & UCD - Nor Cal
Originally Posted by :snoopy:
until you get the vtec head, use the p75. when you do get the head, you can use a chipped p28 or p30 and something to tune with. p28's are easier to find though.