Non to vtec
Thread Starter
wooooo woooooooooo
Joined: Mar 2002
Posts: 3,134
Likes: 0
From: Twin Cities
Non to vtec
I just swapped a d16z6 into my del sol s (d15) and now it won't start. I pulled it out of my del sol si. I did not swap in the harness that goes through the fire wall... Other than that, why won't it start? The fuel pump won't come on, and it won't turn over. I'm running a d16z6 with the p28 ecu. The battery is fine, lights come on, and the dash lights dim when you turn the key, but it doesn't even try to turn over.
Thread Starter
wooooo woooooooooo
Joined: Mar 2002
Posts: 3,134
Likes: 0
From: Twin Cities
Originally posted by qtiger
That happened to me... I forgot to reconnect the ground strap that goes from the valve cover to the front bumper.
That happened to me... I forgot to reconnect the ground strap that goes from the valve cover to the front bumper.
I redid both engine grounds, and then added a third one. Figured it couldn't hurt. So now my dash lights come on brighter. The fuel pump is coming on, but still no cranking.
Thread
Thread Starter
Forum
Replies
Last Post
Turbo_Teg
Parts Classifieds
4
Dec 10, 2002 08:10 PM
jermothedrunk
Parts Classifieds
2
Oct 30, 2002 09:53 PM