Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

ZC motor: HELP

Thread Tools
 
Old Aug 6, 2002 | 09:21 PM
  #1  
ChillOutWayne's Avatar
ChillOutWayne
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 249
Likes: 0
From: Chicago
Default ZC motor: HELP

A friend of mine owns a 88 CRX with a ZC motor swap. he bought it about two months ago and hasnt been able to start it since...the guy he bought it off of said it didnt run so he got it real cheap. anyway i went over there to see if i could figure it out and heres what i figured...hes getting gas, a spark, a solid crank, and just will not fire for anything, just crank like hell. i checked everything i could think of, plugs, wires, cap, rotor, fuses, grounds, fuel filter, and everything seems to be in place. any suggestions of where else to look for a way to get this running..thanx in advance
Reply
Old Aug 7, 2002 | 05:25 AM
  #2  
GimpyAccord's Avatar
GimpyAccord
Senior Member
 
Joined: Jul 2002
Posts: 185
Likes: 0
From: Des Moines, IA
Default

sure this things in time??? sounds like a timing problem off hand.
Reply
Old Aug 7, 2002 | 06:58 AM
  #3  
ChillOutWayne's Avatar
ChillOutWayne
Thread Starter
Senior Member
 
Joined: May 2002
Posts: 249
Likes: 0
From: Chicago
Default

yea we are gonna try the timing next thing, anything else?
Reply
Old Aug 8, 2002 | 09:06 AM
  #4  
AwwsChwA's Avatar
AwwsChwA
Senior Member
 
Joined: Jun 2002
Posts: 499
Likes: 0
From: San Diego, CA
Default

this is a dumb idea, but did you make sure to check that the ECU fuse isn't blown? It's in the fuse box that's on the passenger-side strut tower, it's a 15-amp fuse. If that fuse is blown or removed, the engine will not start, no matter what you try. Just a thought
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
miker01
CRX & Pre 92 Civic
0
Mar 24, 2011 11:52 PM
crvtec Integra
Parts Classifieds
1
Jan 25, 2004 04:14 PM
Whitelude420
Prelude
1
May 27, 2003 05:20 AM




All times are GMT -8. The time now is 06:40 AM.