B18C1 Turbo'd in a civic
Thread Starter
Swolen Member
Joined: Jun 2002
Posts: 264
Likes: 0
From: Baltimore, MD
B18C1 Turbo'd in a civic
Anyone run a turbo'd B18C1 in a civic? If so, what setup are you running, kit or custom, how is it working for ya and how much did it cost? Let me know.
Registered User
Joined: Jul 2003
Posts: 56
Likes: 0
From: little rock
Its a stock b18c1, drag manifold, small intercooler, 54trim/.63 exhaust turbo, hondata, and skunk 2 intake manifold @6psi<-------- see dyno for this set-up below
and theres a guy named Josh Elam that works at Polk Performance in Little Rock AR that has a b18c1 turbod hatch that dynoed at 582 whp and 360lb ft of tq @25 psi not sure on the set-up but you could call him and he could tell you 501-847-7223
and this is in a 92 civic hatch BTW
and theres a guy named Josh Elam that works at Polk Performance in Little Rock AR that has a b18c1 turbod hatch that dynoed at 582 whp and 360lb ft of tq @25 psi not sure on the set-up but you could call him and he could tell you 501-847-7223
and this is in a 92 civic hatch BTW
Still here... sorta...
Joined: Sep 2000
Posts: 17,177
Likes: 2
From: CO
Thread
Thread Starter
Forum
Replies
Last Post
Mike
Engine Swaps, Tech & Tuning
0
Apr 5, 2003 03:30 PM