if i buy a garrett t25/t28 turbo what else will i need and does it also mean i have to sacrifice my ac?

 

are you getting just the turbo? if so, you'll need a manifold, all assorted lines, intake piping, intercooler, fuel system

 

What engine do you have? Cause you might need a bigger tubo than that. Also, you have a whole bunch of other stuff to get/look into other than the turbo. For a good start, your going to need to look into fuel/timming managment cause there is a huge market out for that. Also, depending on the turbo, your going to want to look into boost managment like waist gates and B.O.V.'s. Other than that, you just going to have a whole bunch of plumming for your charge pipping and exhaust parts. You could also look into some nessesary guages, i.e. air/fuel, oil pressure, exhaust temp, etc.

Well, hope that was of help to you

 

http://www.cse.uconn.edu/~yelevich/turbo/turbo.html

:thumbup:

 

Need:

Turbo
Oil lines
Coolant lines ( if it has them )
Charge pipes
Blowoff Valve
Intercooler
some type of fuel management ( s-afc, v-afc, fmu )
bigger injectors if using s-afc or v-afc
a/f gauge
boost gauge
vacuum line
oil fittings
filter for turbo
downpipe made for your car
exhaust manifold ( CX, HF, STD )
adapter plate from manifold to the turbo ( purchased at www.homemadeturbo.com )

did i forget anything???

 

http://www.phatwhippincrx.20m.com/contact.html