The circumference of the Halo would be to your judgement but once you got the right size make your halo as show.
The difficult part would be "hanging" it. You have two options:
1.Drill holes in the hosing just like the site and use wires to support the halo
2.Glue the halo to the clear plastic hosing (do not use Super Glue, super glue and clear plastic do not mix it will leave a white residue go to a hobby craft store and ask for their "special" superglue.

I would put the halo in the iner light the "FOG LIGHT"

DO THIS AT YOUR OWN RISK I TAKE NO REPONIBLITY FOR YOUR ACTIONS hehehe:fawk: :thumbup:

 

you can always go on ebay to find led's I think a bulk pack of blue led's (100) are only 20. You can thank me later

 

hey b12 cant open your link its dead

 

heres a working one

http://www.geocities.com/jvxdriver/angel_eyes.htm

 

i was wondering if someone can tell me how the wiring goes for the dual halo projector lights. it's for a 98 honda civic. i'm really stumpped.

 

Plug the new lights into the original harness. The two little wires for the halos need to plug into the side marker lamp. One will be a ground and the other a constant. The white wire from the halos splice into the black wire to the corner lamps. The red wire from the halos splice inot the red wire to the corner lamps. The green wire on the corner lamps is for the intermittent blinking, which you will not need to splice anything into.

 

thank you

 

np

 

anyone know how the wiring goes for the angel eyes harness?

 

you know how to wire up the harness for the angel eyes?