replace TPS?? how
10-08-2003, 06:22 PM
#2
I'm RICK JAMES, bitch!
Join Date: Mar 2002
Location: Baltimore, Md
Posts: 4,742
Likes: 0
Received 0 Likes
on
0 Posts
Its not supposed to be removable. However it is held on by 2 rivets as some people call them, yet I have a feeling they are really more like shear bolts. But anyway if you cut them with a dremel or something to make a slot you can unscrew them out and remove the TPS. Than install a new one. You will need to use a volt meter to correctly set the new TPS though as it gets messed up once you take it off.
10-09-2003, 07:13 AM
#3
Senior Member
Join Date: Sep 2002
Location: Colorado Springs
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
much easier just to swap the Si throttle body onto your engine - without sophisticated equipment, you will never get the TPS set right - most voltmeters are not sensitive enough to get it right on