d16a6 head on a d15b7 block
08-31-2008, 07:51 PM
Junior Member
Thread Starter
Join Date: Feb 2008
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
d16a6 head on a d15b7 block
i have a d16a6 head on my d 15b7 will it work and or will i get any thing out of it and i just got a aftermarker intake manifold will i get a noticeable diff.
08-31-2008, 10:07 PM
Junior Member
Join Date: Aug 2008
Location: san beranrdino
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
yes u will trust me u will
09-02-2008, 02:15 PM
Junior Member
Thread Starter
Join Date: Feb 2008
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
yes the head will work and i will be faster or the mainifold will be a noticable differance
09-03-2008, 09:44 AM
d-series scum
Join Date: May 2008
Location: ca
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
same head casting, better cam.
09-03-2008, 08:43 PM
Junior Member
Thread Starter
Join Date: Feb 2008
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
the a6 head is built. can i put a a6 head on a b7 block???(will the compressions work??)
09-05-2008, 12:19 PM
d-series scum
Join Date: May 2008
Location: ca
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
unless it's been 'milled' the compression will be the same.
btw, use a y7/y8 cam gear with the a6 cam (to compensate for the different deck height of d15b7 to d16a6)
09-06-2008, 08:33 PM
Junior Member
Thread Starter
Join Date: Feb 2008
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
do i have to have a y8 cam gear????
09-07-2008, 05:40 PM
d-series scum
Join Date: May 2008
Location: ca
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
if you use the b7 gear you will be off by approx 1 tooth.
can be fixed with an adjustable cam gear.
but a y8 gear is much cheaper.