Ok, I already know how to do a rear disc swap, but there is one thing that I can't figure out. Which e-brake cable should I use? I have a 90 crx hf, and I bought the rear trailing arms from a 90-93 integra (with everything but the e-brake cable). Will my stock e-brake cable work, if not, from which car should I get one? Thanks for any help or advice.

 

i read somewhere u can use the ones off the teg but there longer and have to be routed different, i also read that u could drill out something on the brake and swap the cables

 

teg cables would work, but as said, i think they have to be routed different. if you can get your hands on 90-91 CRX Si cables, they would work for your application the best.

 

thanks guys.

 

You may not need everything but it's good to have!
90-93 Integra Rear Trailing Arms (with everything attached Rotor, Caliper, Ebrake Cables...)
or
90-91 CRX Rear Trailing Arms (with same...)
You can use either trailing arm but for CRX you need CRX ebrake cables and for Civic you need Integra ebrake cables (might as well get whole CRX trailing arm + cables for CRX, and whole Integra trailing arm + cables for Civic)
90-93 Integra "4040" Brake Proportioning Valve (Prop Valve), HIGHLY RECOMMENDED!!!