When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
To press out a broken stud, I put a socket over the back of the stud and pressed it w/ a hefty c-clamp. I thought this would be gentler than pounding on the wheel hub. -scott
To press out a broken stud, I put a socket over the back of the stud and pressed it w/ a hefty c-clamp. I thought this would be gentler than pounding on the wheel hub. -scott
that can work if there still is part of the wheel stud sticking out...most of the bent studs i've seen had to be cut at the hole leaving nothing protruding out to use a "c" clamp on...we just used a punch and a hammer to bang it out
-scott
