sunroof panel crooked on the tracks as it is closing ?
#1
Junior Member
Thread Starter
Join Date: Nov 2013
Location: Dallas, Texas
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
sunroof panel crooked on the tracks as it is closing ?
car is a 90 crx si, 250,000 miles,
what would cause the sunroof panel to be shift back more on one side, where its crooked on the tracks as it is closing ?
it should be straight and even across each side so it is lined up to the sunroof hole opening, but on mine the driver side of the sunroof panel is back further and does'nt keep up with the passenger side as it is moving closed ?, as if the pass. side is normal and lined up , but the driver side is slower and back farther and not able to catch up with the other side ? and i have to push and guide it with my hand as i press the button or use the allen wrench.
the other thing is when pressing the button to open or close the sunroof, it does'nt always do much, sometimes it does move the sunroof but if it does it does it really really slowly, but other times it does'nt do anything and you have to use the allen wrench manually, sound like a motor thing ? or a switch thing ?
any help or direction on what to check would be appreciative, thanks
what would cause the sunroof panel to be shift back more on one side, where its crooked on the tracks as it is closing ?
it should be straight and even across each side so it is lined up to the sunroof hole opening, but on mine the driver side of the sunroof panel is back further and does'nt keep up with the passenger side as it is moving closed ?, as if the pass. side is normal and lined up , but the driver side is slower and back farther and not able to catch up with the other side ? and i have to push and guide it with my hand as i press the button or use the allen wrench.
the other thing is when pressing the button to open or close the sunroof, it does'nt always do much, sometimes it does move the sunroof but if it does it does it really really slowly, but other times it does'nt do anything and you have to use the allen wrench manually, sound like a motor thing ? or a switch thing ?
any help or direction on what to check would be appreciative, thanks
#2
hello folks, I'm attempting to discover a directing wheel for my gf's vehicle, its a 89 incubate with a gsr trade, we been building it some time and her's is rusted and looks like garbage, I needed to get her a pleasant one however have never purchased a reseller's exchange controlling wheel. Do they all fit something similar? say in the event that I got like a 97 honda ctr or itr guiding wheel would it simply dash up something very similar? or then again are controlling wheels body style explicit?
Kodi nox
Kodi nox
Thread
Thread Starter
Forum
Replies
Last Post