Engine Source?
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 419
Likes: 0
From: Moncton, N.B. Canada
Will a JDM SOHC D15B Vtec...bolt right into...my CDM 90 Civic HB Si? (I know there is no CDM...but all 90 Civics were built in Canada!! 
) I found a good price on one in Montreal and am looking at it...
Also would the above engine be better than the non-Vtec stock D16A6??
...or the DOHC ZC (both the D15B-V & the ZC are 130Hp)
Jason
PS> Hey snoopy...my bad...someone else corrected me on that too.
) I found a good price on one in Montreal and am looking at it...Also would the above engine be better than the non-Vtec stock D16A6??
...or the DOHC ZC (both the D15B-V & the ZC are 130Hp)
Jason
PS> Hey snoopy...my bad...someone else corrected me on that too.
HC Racer H5
Joined: May 2000
Posts: 4,261
Likes: 0
From: KCK
Originally posted by Magik
Will a JDM SOHC D15B Vtec...bolt right into...my CDM 90 Civic HB Si? (I know there is no CDM...but all 90 Civics were built in Canada!! ) I found a good price on one in Montreal and am looking at it...
Also would the above engine be better than the non-Vtec stock D16A6??
...or the DOHC ZC (both the D15B-V & the ZC are 130Hp)
Jason
PS> Hey snoopy...my bad...someone else corrected me on that too.
Will a JDM SOHC D15B Vtec...bolt right into...my CDM 90 Civic HB Si? (I know there is no CDM...but all 90 Civics were built in Canada!!
) I found a good price on one in Montreal and am looking at it...Also would the above engine be better than the non-Vtec stock D16A6??
...or the DOHC ZC (both the D15B-V & the ZC are 130Hp)
Jason
PS> Hey snoopy...my bad...someone else corrected me on that too.
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 419
Likes: 0
From: Moncton, N.B. Canada
Originally posted by jaje
(cdm si is our ex right?...with mpfi)
(cdm si is our ex right?...with mpfi)
I'm not sure to be honest...it has a D15B2 in it right now...it has already had one swap prior to me owning it...I believe it is MPFI...
The D15B2, according to a spec sheet that I have is the following...
1.5 16V, SOHC, PGM-FI 1493 92HP@6000RPM 88-91 DX/LX (USA)
The D16A6 which comes stock in an Si is:
1.6 16V, SOHC, PGM-FI 1590 108HP@6000RPM 88-91 Si/CRX Si
All 90 Civics were manufactured at the plant in Allison, Ontario...mine rolled out in August of 1990. So I assume that an Si would be an Si...but I could be wrong.
Can anyone clarify?
Jason.
Here's the link to the engine's that I'm looking at in Montreal...
http://www.naganojapanese.com/shop_online_honda.html
Registered User
Joined: Oct 2003
Posts: 62
Likes: 0
Originally posted by WhiteRice
There's a place in Canada called Luckystar. I've heard mixed reviews about them though.
There's a place in Canada called Luckystar. I've heard mixed reviews about them though.
Do not under any circumstances go to Luckystar In toronto.
(1hr from me)
They have screwed too many people!!!
-Eric
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 419
Likes: 0
From: Moncton, N.B. Canada
Originally posted by GsrRex88
\
Do not under any circumstances go to Luckystar In toronto.
(1hr from me)
They have screwed too many people!!!
-Eric
\
Do not under any circumstances go to Luckystar In toronto.
(1hr from me)
They have screwed too many people!!!
-Eric
Jason