ziggyziggy

do i just pull out the factory speakers and attach the new ones or do i need some sort of special adapters for the aftermarket speakers, kinda like the idea of aftermarket headunits. i've never open up my door panel b4.

Fujiwara Takumi

the stock speakers are two, (very short ), wires with a plastic harness on the end that plugs straight into the OEM speakers. if you plan to add aftermarkets with no adapter on the after market youll need to get your solder on and clip the harness off the stock wires. the speakers should fit in very easily, in my car its proly about 30 mins to do all four, 20 mins a pair or less.

VRGNCD5

when you buy aftermarket speakers, they dont come with the cute plastic adaptor like on your stock speakers. You can either get the harness so you can just plug it right in, or you can cut the plug off and either solder (if you have skills) or crimp the wires together. So long as you get the right size speaker, including right depth (which is a big issue w/most hondas) then it will be an easy experience.

ziggyziggy

how much would the harness cost?

Fujiwara Takumi

i dunno where youd get the harnesses, except i know crutchfield will sell speakers with them built in.

ziggyziggy

so i assume most of u guys just solder them on?

Cashis EG8

Circuit City, Best Buys, Good Guys, etc...should have speaker harnesses for $5.99 a pair.

Fujiwara Takumi

hmm, i learned somethign new today. rock on.

b00gers

yea the harnesses arent too expensive. but they are practically useless to me since i always run aftermarket wires...=P

VRGNCD5

I don't solder mine on, I get the correct terminals to connect to the speaker and crimp them on. Like Will, I run my own speaker wire, usually monster cable.